HP 8712ET User Manual page 360

Pwr Level
at Preset
Pwr Sweep
Range
Hardkey/Softkey Reference
P
Softkey in the POWER
than the factory default of 0 dBm) that the analyzer will always return
to when the Factory Preset
your entry with one of the softkeys or the
For instruments with an attenuator (Option 1E1) installed: softkey in
the menu. Leads to the power sweep ranges menu. There are seven
predetermined power ranges to choose from.
See the Power Sweep
the power sweep function.
8-68
menu. Allows you to set a power level (other
key is pressed. Be sure to terminate
ENTER
entry in this chapter for more information on
key.
ET User's Guide