HP 8712ET User Manual page 327

Gateway
IP Address
Graph and
Mkr Table
Graph Only
Graphics Pen
Graticule
ON off
G
Softkey in the LAN port setup menu. Allows you to set the gateway IP
address that your network administrator assigned to your analyzer. If
no address was assigned, leave the setting at 0.0.0.0 (default value) to
disable gateway routing.
See The LAN Interface User's Guide Supplement for more information.
Access Keys: SYSTEM OPTIONS
Softkey in the define hardcopy menu. Defines the hardcopy to print
both the graph and the marker table.
NOTE
See "To Define the Output" on page 4-78
Access Keys:
HARDCOPY
Softkey in the define hardcopy menu. Defines the hardcopy as the
graph.
See "To Define the Output" on page 4-78
Access Keys:
HARDCOPY
Softkey in the set pen numbers menu. Sets pen number assignment
(color) for the annotation on a hardcopy.
Access Keys:
HARDCOPY
Softkey available in two different menus: the more display menu and
the define graph menu. This softkey toggles the display graticule (grid)
on and off. When pressed in the more display menu, the graticule are
suppressed from showing on the CRT. When pressed in the define
graph menu, the graticule are suppressed from printing or plotting on
a hardcopy.
Access Keys:
DISPLAY
Define Hardcopy
ET User's Guide
LAN
The marker table prints only if one or more
markers are on.
Define Hardcopy
Define Hardcopy
Define Plotter
More Display
Define Graph
Hardkey/Softkey Reference
LAN Port Setup
for more information.
View Cal Check
for more information.
Set Pen Numbers
or
HARDCOPY
G
8-35