1.3
D/A Conversion Enable/Disable Function
Set whether to enable or disable the D/A conversion for each channel.
Disabling the D/A conversion for unused channels reduces the D/A conversion cycles.
Setting procedure
Set "D/A conversion enable/disable setting" to "D/A conversion enable" or "D/A conversion disable".
Navigation window [Parameter] [Module Information] Module name [Module parameter] "Basic settig"
"D/A conversion enable/disable function"
1.4
D/A Output Enable/Disable Setting Function
Specify whether to output the D/A conversion value or offset value for each channel.
The conversion speed is a constant, regardless of the output enable/disable state.
Setting procedure
Set to enable or disable the D/A output for each channel with 'CH1 Output enable/disable flag' (Y1).
'CH1 Output enable/disable flag' (Y1)
Enable (ON)
Disable (OFF)
Analog output
The D/A conversion value is output.
The offset value is output.
1.3 D/A Conversion Enable/Disable Function
1
1 FUNCTIONS
19