Mitsubishi Electric MELSEC iQ-R Series User Manual page 156

CH1 Scaling upper limit value
Set the range of the scale conversion.
For the scaling function, refer to the following.
Page 23 Scaling Function
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH Scaling upper limit value
CH Scaling upper limit value (When the Q
compatible mode function is used)
■Setting range
The setting range is from -32000 to 32000. In the channel where a value out of the range is set, a scaling setting range error
(error code: 1A1H) occurs. In the channel where a set value does not satisfy the condition "scaling upper limit value 
scaling lower limit value", a scaling upper/lower limit value setting error (error code: 1A2H) occurs.
When 'CH1 Scaling enable/disable setting' (Un\G502) is set to Disable (1), the setting for 'CH1 Scaling upper limit value'
(Un\G504) is ignored.
■Enabling the setting
Turn on and off 'Operating condition setting request' (Y9) to enable the setting.
■Default value
The default value is 0 for all channels.
CH1 Scaling lower limit value
Set the range of the scale conversion.
For the scaling function, refer to the following.
Page 23 Scaling Function
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH Scaling lower limit value
CH Scaling lower limit value (When the Q
compatible mode function is used)
■Setting range
The setting range is from -32000 to 32000. In the channel where a value out of the range is set, a scaling setting range error
(error code: 1A1H) occurs. In the channel where a set value does not satisfy the condition "scaling upper limit value 
scaling lower limit value", a scaling upper/lower limit value setting error (error code: 1A2H) occurs.
When 'CH1 Scaling enable/disable setting' (Un\G502) is set to Disable (1), the setting for 'CH1 Scaling lower limit value'
(Un\G506) is ignored.
■Enabling the setting
Turn on and off 'Operating condition setting request' (Y9) to enable the setting.
■Default value
The default value is 0 for all channels.
APPENDICES
154
Appendix 3 Buffer Memory
CH1 CH2 CH3
504 704 904
55 57 59
CH1 CH2 CH3
506 706 906
54 56 58
CH4 CH5 CH6
1104 1304 1504
61 63 65
CH4 CH5 CH6
1106 1306 1506
60 62 64
CH7 CH8
1704 1904
67 69
CH7 CH8
1706 1906
66 68