Rep 9.1 Crum Pwb - Xerox Phaser 3635MFP Service Manual

REP 9.1 CRUM PWB

Parts List on PL 9.10
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
Before performing this procedure, refer to
1. Remove the DADF, PL 5.10 Item 1.
2. 3635 only. Remove the UI assembly,
3550 only. Remove the UI assembly,
3. Remove the rear cover assembly, REP
4. Remove the scanner assembly, REP
5. Remove the outbin, REP 28.2.
6. Remove the LSU, REP 6.1.
7. 3635 only. Disconnect CN17 from the
3550 only. Disconnect CN 25 from the
8. Remove 1 screw, then the CRUM PWB,
Replacement
1. Replacement is the reverse of the removal procedure.
Phaser 3635MFP/WorkCentre 3550
CAUTION
GP 10 General Disassembly Precautions.
REP 2.1.
REP 2.3.
28.1.
14.1.
Main PWB.
Main PWB.
PL 9.10 Item 7.
April 2010
4-27
Repairs and Adjustments
REP 9.1