Xerox Phaser 3635MFP Service Manual page 60

OF4 Copying Error RAP
Use this RAP if the machine does not copy correctly when the customer uses features such as
auto size detect, edge erase, book copying and image shift.
Procedure
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. (3635 Only). Perform the Scan Edge test,
2. Clean the document glass (3635) PL 14.10 Item 27
3. Install a new scanner cover,
• (3635) Scanner cover, PL 14.10 Item
• (3550) Scanner cover, PL 14.11 Item
Phaser 3635MFP/WorkCentre 3550
GP 18 Scan Edge (3635 Only).
or (3550) PL 14.11 Item 3.
20.
1.
OF5 Stapler Fault RAP
Use this RAP if the stapler fails to operate.
Procedure
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Refer to Wiring Diagram 9 (3635).
1. Check the stapler door interlock switch, go to
2. Check the wiring between CON1 on the stapler and CN4 on the
3. Open the stapler door, PL 28.10 Item
moves freely and actuates the paper present switch.
4. Install new components as necessary:
• Stapler, PL 11.10 Item
• Connection PWB, PL 3.10 Item
April 2010
2-51
WARNING
01-700 Stapler Door Open
Connection
9. Check that the paper present switch actuator
3.
17.
Status Indicator RAPs
RAP.
PWB.
OF4, OF5