Canon Color iR C3480 Service Manual page 675

Chapter 17
Sub item
PDF-RDCT Switches to reduction transmission for reception transfer (PDF transmission).
Images received in FAX, IFAX modes are converted to PDF and then reduced for transmission as email or for file
transmission.
Setting values
0: Image not converted to PDF and reduced for reception transfer.
1: Image converted to PDF and reduced for reception transfer.
[Factory settings and after RAM clear: 0]
REDU-CNT Density adjustment method switching control
This controls whether to perform the kind of density adjustment in which restrictions on the amount of toner are factored.
Settings
0: The kind of density adjustment is not performed.
1: The kind of density adjustment is performed.
[Factory setting/value after clearing RAM: 0]
REBOOTSW Restart switch when the E240 error occurs
Normally, when the E240 error (an error in communication between the main controller and DC controller) occurs, the
drive system may continue operating so the specifications calls for an automatic restart. However, restart causes the
spooled print jobs to be cleared (and this could lead to complaints from our users). This item, therefore, makes it possible
to set whether automatic restart is to be initiated when the E240 error occurs.
Settings
0: Operation is restarted automatically when the E240 error occurs.
1: Operation is not restarted automatically when the E240 error occurs.
[Factory setting/value after clearing RAM: 0]
Attention:
- This must not be used under normal circumstances.
- When users wish to use this item, they must be given a thorough explanation.
VP-ART Mode to enable the line art processing to be changed
This changes the outlining process of the line art in scalable PDF files.
Setting range: 0 to 99
[Factory setting/value after clearing RAM: 1]
VP-TXT Mode to enable the vector-generating process for characters to be changed
This changes the vector-generating process for characters in scalable PDF files.
Setting range: 0 to 99
[Factory setting/value after clearing RAM: 1]
UI-PRINT Control area printing job screen display restriction
Switch for selecting whether to display the printing job screen in the control area.
This specification is for users who are customizing the control area so that they have the option of not displaying the
screen.
Settings
0: The printing job screen is not displayed.
1: The printing job screen is displayed.
[Factory setting/value after clearing RAM: 1]
WUEV-SW Sleep notification selector switch
This sets whether to post the sleep notification to the DS application on the network when the copier unit has been
transferred or reset to the sleep mode.
Settings
0: Sleep notification is posted.
1: Sleep notification is not posted.
[Factory setting/value after clearing RAM: 0]
WUEV-INT Sleep notification interval setting
This sets the sleep notification interval when sleep notification is to be posted.
Setting range: 60 to 65536 (in 1-second increments)
[Factory setting/value after clearing RAM: 600]
WUEV-POT Sleep notification destination port number setting
This sets the PC port number of the sleep notification destination when sleep notification is to be posted.
Setting range: 1 to 65535
[Factory setting/value after clearing RAM: 11427]
WUEV-RTR Sleep notification range setting
This sets the number of routers through which the sleep notification can pass until its destination when sleep notification
is to be posted.
Setting range: 0 to 254
[Factory setting/value after clearing RAM: 3]
SJB-UNW Selector switch for number of secure print jobs on hold (number of reserved jobs)
This selects 50 or 90 as the upper limit for the number of secure print jobs on hold (number of reserved jobs).
Setting
0: 50
1: 90
[Factory setting/value after clearing RAM: 0]
UI-RSCAN Control unit remote scan screen display restriction
This switch is used to select whether to display the remote scan screen on the control unit.
This specification is for users who are customizing the control area so that they have the option of not displaying the
screen.
Settings
0: The remote scan screen is not displayed.
1: The remote scan screen is displayed.
[Factory setting/value after clearing RAM: 1]
17-72
COPIER>OPTION>BODY
Description level.
2
2
2
2
2
2
2
2
2
2
2
2