Canon Color iR C3480 Service Manual page 580

Code Main Cause/Detail of Detection
***: Finisher-Z1 ****: Finisher-Y1, Saddle Finisher-Y2 *****: Puncher Unit
**** 8001 The HP sensor fails to be OFF after the end assist motor rotates for a specific
period of time.
**** 8002 The HP sensor fails to be ON after the end assist motor rotates for a specific
period of time.
E519 **** Gear change motor error
8001 The HP sensor fails to be OFF after the gear change motor rotates for a specific
period of time.
8002 The HP sensor fails to be ON after the gear change motor rotates for a specific
period of time.
E530 *** Rear alignment error / **** Front alignment error
*** 8001 The HP sensor fails to be ON within 2000ms after the rear adjuster plate starts
to move to its HP.
*** 8002 The HP sensor fails to be OFF within 1000ms after the rear adjuster plate starts
to move from its HP.
**** 8001 The HP sensor fails to be OFF after the front jog motor rotates for a specific
period of time.
**** 8002 The HP sensor fails to be ON after the front job motor rotates for a specific
period of time.
E531 Staple error
*** 8001 The HP sensor fails to be ON within 500ms after the staple motor starts to drive
in the reverse direction to recover from a staple jam.
*** 8002 The HP sensor fails to be OFF within 500ms after the staple motor starts to
drive.
**** 8001 The HP sensor fails to be OFF after the staple motor rotates for a specific
period of time.
**** 8002 The HP sensor fails to be ON after the staple motor rotates for a specific period
of time.
E532 Staple unit shift error
*** 8001 The HP sensor fails to be ON within 11000ms after the staple unit starts to
move to the stapling HP.
*** 8002 The HP sensor fails to be OFF within 1000ms after the staple unit starts to
move from its HP.
**** 8001 The HP sensor fails to be OFF after the staple shift motor rotates for a specific
period of time.
**** 8002 The HP sensor fails to be ON after the stapler shift motor rotates for a specific
period of time.
E535 Swing error
*** 8001 The HP sensor fails to be ON within 2000ms after the swing arm starts to move
to its HP.
*** 8002 The HP sensor fails to be OFF within 1000ms after the swing arm starts to
move from its HP.
**** 8001 The HP sensor fails to be OFF after the swing motor rotates for a specific
period of time.
**** 8002 The HP sensor fails to be ON after the swing motor rotates for a specific period
of time.
E537 *** Front alignment error / **** Rear alignment error
*** 8001 The HP sensor fails to be ON within 2000ms after the front adjuster plate starts
to move to its HP.
*** 8002 The HP sensor fails to be OFF within 1000ms after the front adjuster plate
starts to move from its HP.
**** 8001 The HP sensor fails to be OFF after the swing motor rotates for a specific
period of time.
**** 8002 The HP sensor fails to be ON after the swing motor rotates for a specific period
of time.
E540 *** Stack tray up/down error / **** Upper tray up/down error
*** 8002 Paper surface detection fails to end within 1000ms.
*** 8003 Encoder lock within 200ms fails to reach 10pulse during paper surface
detection.
*** 8004 Outputs of the top paper sensor, bottom paper sensor, tray upper limit sensor,
and tray lower limit sensor have abnormality during paper surface detection.
**** 8001 The upper tray up/down motor clock is abnormal.
**** 8002 Area is abnormal.
**** 8003 The safety switch is activated.
E542 **** Lower tray up/down error
8001 The lower tray up/down motor clock is abnormal.
8002 Area is abnormal.
8003 The safety switch is activated.
E577 *** Paddle error
Countermeasures
Replace the end assist HP sensor (PI39) , Replace the end assist
motor (M39)
Replace the gear change HP sensor (PI49) , Replace the gear
change motor (M40)
Replace the rear adjuster plate HP sensor (SR4) , Replace the
rear adjuster plate motor (M4)
Replace the front adjuster plate HP sensor (PI36) , Replace the
front adjuster plate motor (M33)
Replace the stapling HP sensor (SR18) , Replace the staple
motor (M9)
Replace the staple HP sensor (PI50) , Replace the staple motor
(M41)
Replace the stapler slide HP sensor (SR6) , Replace the stapler
slide motor (M8)
Replace the stapler shift HP sensor (PI50) , Replace the stapler
shift motor (M35)
Check on operation of the stack delivery motor swing
mechanism, Replace the swing cam HP sensor (SR7) , Replace
the swing cam motor (M5)
Replace the swing HP sensor (PI35) , Replace the swing motor
(M36)
Replace the front adjuster plate HP sensor (SR3) , Replace the
front adjuster plate motor (M3) , Replace the adjuster plate
drive belt
Replace the rear adjuster plate HP sensor (PI37) , Replace the
rear adjuster plate motor (M34)
Replace the stack tray top paper sensor (SR9) , Replace the
stack tray bottom paper sensor (SR10) , Replace the stack tray
upper limit sensor (SR13) , Replace the stack tray lower limit
sensor (SR12) , Replace the stack tray shift motor (M7)
Replace the shift motor (M37) of the tray 1, Replace the shift
area sensor PCB of the tray 1
Replace the shift motor (M38) of the tray 2, Replace the shift
area sensor PCB of the tray 2
Chapter 16
16-7