Canon Color iR C3480 Service Manual page 681

Chapter 17
Sub item
FILE-OF Sets file address transmission prohibition.
This setting prohibits transmission to a file address by prohibiting file address entry into the address book.
Setting values
0: Do not prohibit transmission to file address.
1: Prohibit transmission to file address.
[Factory settings and after RAM clear: 0]
MAIL-OF Sets email address transmission prohibition.
This setting prohibits transmission to an email address by prohibiting email address entry into the address book.
Setting values
0: Do not prohibit transmission to email address.
1: Prohibit transmission to email address.
[Factory settings and after RAM clear: 0]
IFAX-OF Sets IFAX address transmission prohibition.
This setting prohibits transmission to an IFAX address by prohibiting IFAX address entry into the address book.
Setting values
0: Do not prohibit transmission to IFAX address.
1: Prohibit transmission to IFAX address.
[Factory settings and after RAM clear: 0]
LDAP-DEF Switches LDAP search condition defaults.
Sets default search attributes when LDAP detailed search is selected.
Setting values
0: 'Name'
1: 'Email'
2: 'Fax'
3: 'Organisation'
4: 'Unit'
5: User setting 1
6: User setting 2
[Factory settings and after RAM clear: 0]
ACS-DSP ACS ON/OFF screen display switching
This selects whether to display the switches to be used for selecting or not selecting automatic color with initial settings/
registration. When a CL series machine is installed, the service technician ensures that the screen, on which to select
whether to use ACS, is displayed in initial settings/registration if this is requested by the user.
Reference:
Initial settings/registration has been created to meet user demand to prevent fees from being charged for color because
ACS is set when the charging system is installed even in cases where such fees do not apply. This item also selects
whether the above screen is to be displayed.
Settings
0: Not displayed.
1: Displayed.
[Factory setting/value after clearing RAM: 0]
SIZE-DET Sets document size detection function ON/ OFF.
When the pressure plate opens and closes, there is no light flashing, so extraneous light can be cut out.
Setting values
0: OFF
1: ON
[Factory settings and after RAM clear: 1]
2
DATE-DSP Used to switch date display.
0: 'YYMM/DD
1: DD/MM'YY
2: MM/DD/YY
MB-CCV Used to select whether to restrict mailbox control card users.
0: Don't restrict
1: Restrict
TRY-STP Used to set mode in which output stops when tray is full.
0: Normal mode (Interrupted when finisher tray is full.)
1: Interrupted only by height detection
MF-LG-ST Sets long length mode key.
Setting values
0: Normal setting
1: Display long length key in mode screen.
[Factory settings and after RAM clear: 0]
CNT-DISP Used to select whether to display serial number when counter check key is pressed.
0: Display serial number.
1: Don't display serial number.
NW-SCAN Used to select whether to permit network scan function
0: Don't permit
1: Permit (Invalid when UFR board or open interface board isn't connected.)
17-78
COPIER>OPTION>USER
Specification selection related to user mode
Description level.
1
1
1
1
2
2
2
2
2
2
2
2