- The status of the license must be 'Not Installed' or 'Unnecessary' for its application to be uninstalled. As necessary, go to License File Management page, and

disable the license file before starting to remove it.

- A license file may be invalidated only when its application is not active.

- If the application you are uninstalling is associated with another application, a message will appear to indicate that the package exported by the application will

no loner be available. Uninstalling such an application may also disable its associated applications.

11.1.20 Changing Login Services

Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 / Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iR C3080i / iR

C2550

The login service is used to authenticate users who logs in to a MEAP device. You can change login services or uninstall them using System Management site.

At time of shipment, the login service offers the following 3 modes of authentication:

- Default authentication

- SDL (Simple Device Login)

- SSO (Single Sign-On)

Important:

- To set SDL, the registered information in SDL and the registered user data (Department ID and Password) in Department ID Management of the machine have

to match.

- To set up SDL or SSO, Department ID Management must be set to Off in advance. To use SDL and Department ID Management simultaneously, set

Department ID Management to On after switching the login service to SDL.

- If SSO is set as the login service, NetSpot Accountant is necessary for using Department ID Management.

- If SSO is set, you cannot use an optional card reader.

- To set to SSO, first adjust the current time for the PC where Active Directory is running, the iR, and the PC where users log on. If there is more than a 30-

minute difference among them, an error occurs at logon.

- If SSO or SDL is set as login service, it takes time until the iR is ready to start up.

- When the SEND function is used in the environment of SDL and SSO, it is necessary to set each user's mail address to transmit E-mail. When the mail address

is not set, E-mail cannot be transmitted. However, when i-Fax is transmitted, the mail address set to the device is used.

Outline of Default Authentication

In this mode of authentication, you will be using Department ID Management or you will not be using any authentication mechanism. If you enable the Department

ID Management in the MEAP device's Additional Functions mode, the user can use the device only when he/she enters an ID number (a 7-character ID and pass-

word) that has been registered from the device's touch panel display or through Remote UI.

Outline of SDL (Simple Device Login)

In this mode of authentication, you will be operating on a MEAP device on its own. You will store user information to the MEAP device's memory by accessing

the device through a Web browser. SDL offers the following functions:

a. it brings up the Login screen on the MEAP device's touch panel display for user authentication.

b. it brings up the Login page when you access the MEAP device from Web browser to manage the numbers of printed and scanned sheets for each department ID

working with the department ID management function. it operates in conjunction with the group ID control mechanisms to keep track of the number of print

pages or scan pages according to group IDs.

c. it enables register/editing of user authentication information through a Web browser.

Outline of SSO (Single Sign-On)

F-11-51

Chapter 11

0018-8628

11-33

Table of Contents