- As for the blank (no-cassette), even if inserting the cassette to this point to match the dial, it is regarded that the cassette is not inserted, resulting in no execution

of controls such as lifter uprising operation.

- The machine will assume the absence of a cassette if it detects a combination not found in the table. At this time, it does not move up the cassette lifter.Since

the paper size is not identified, there will be no indication of a paper size on the control panel; when the cassette in question is selected, the machine will indicate

a message prompting the supply of paper.

- As for different terms of size descriptions, such as 12X 18, switch the indication according to the location that the machine is set in service mode.

*1 If an envelope size is detected, an envelope cassette must be fitted.

8.5.4 Setting Up the Universal Cassette

Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 / Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iR C3080i / iR

C2550

The following are default sizes the machine will assume when U1 through U4 are detected:

The following is a list of sizes that may be assigned in addition to default sizes in service mode:

FLSC

OFI

E-OFI

B-OFI

A-OFI

M-OFI

FOLI

A-FLS

G-LTR

G-LGL

A-LTR (LTR)

A-LTRR (LTRR)

Service mode:

COPIER > OPTION > CST > CST-U1

COPIER > OPTION > CST > CST-U2

COPIER > OPTION > CST > CST-U3

COPIER > OPTION > CST > CST-U4

8.5.5 Paper Level Sensor

Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 / Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iR C3080i / iR

C2550

The level of paper inside the cassette is checked using the following sensors:

Paper level sensor A

Paper level sensor B

Paper sensor

8-24

Universal cassette

T-8-8

T-8-9

Cassette 1

PS21

PS22