Software Operation - Extron electronics XTP T USW 103 User Manual

Software Operation

The XTP T USW 103 can be controlled directly from the front panel configuration port (see
figure
Connections
The XTP System Configuration Software opens to the
used to establish communication with an XTP device through USB connection. Ensure the
switcher is connected and powered on before attempting to connect to it.
Figure 17.
To connect to a device:
1.
2.
3.
4.
11, on page 14) or remotely from a connected XTP matrix switcher.
B
Connections Screen
Open the XTP System Configuration Software.
From the screen in the XTP Configuration Software, select the
Connections
button (see figure 17, ).
1
From the displayed list, select the connected device to be controlled (
Click the button (
Connect 3
Settings on page 29).
XTP T USW 103 Switcher • XTP System Configuration Software
Connections
). The screen opens (see
Device Settings
screen. This screen is
radio
USB
).
2
Device
25