Table of Contents
Advertisement
Operation and Setup, cont'd
If you are unable to configure the MLS via the Windows
software
1.
2.
3-10
MLS 304 Series, MLS 406 Series • Operation and Setup
Check the MediaLink Control Software to determine its version number. The
software version number appears in the top bar of the program's window:
These MLS 304 Series and MLS 406 Series switchers can be set up using
software version 2.1 or higher. Earlier versions are not designed to work with
these models.
Verify that the connector at the RS-232/MLC/IR port is correctly wired and
that the PC's correct COM port is selected when you start the software.
-based
®
Advertisement
Table of Contents
Need help?
Do you have a question about the MLS 304MA and is the answer not in the manual?