Control Elements For Cockpit App - Otto Bock 17KO1 Series Instructions For Use Manual

establishing the connection takes too long, the process of establishing a connection is can­
celled. In this case the
INFORMATION
If the connection to the component could not be established or the connection process is ter­
minated, reset the component by connecting and disconnecting the battery charger.

7.3 Control elements for cockpit app

1
Product
2
1. Basic Mode 2. Training mode
4
5
3. Freeze position 4. User defined
6
100%
1. Basic Mode
button on the control panel must be briefly pressed again.
1. Call up the navigation menu (see Page 76)
2. Name of the component. This name can only be changed
using the adjustment app.
change
3
3. If connections to more than one component have been
saved, you can switch between the saved components by
tapping the entry change (see Page 76).
4. MyModes configured with the adjustment app.
Switching the mode by tapping the corresponding symbol
and confirming by tapping "OK".
5. Currently selected mode
6. Charge level of the component.
7
8
Component battery is being charged
The current charge level is also displayed in %.
7. Display and name of the currently selected mode (e.g. 1.
Basic Mode)
8.
is attempting to re-establish the connection automatically.
Component battery fully charged
Component battery empty
Connection to component has been established
Connection to component has been interrupted. The app
75