8.6 Switching Bluetooth of the component on/off
INFORMATION
Bluetooth on the component must be turned on in order to use the Cockpit app. Briefly press
the
button on the control panel to check. In the
If the symbol in the button is not lit up, Bluetooth has to be switched by a long press of the
button.
8.6.1 Switching off Bluetooth
► With the Bluetooth function activated, press and hold the
vibration signal is emitted and the symbol in the button turns off.
→ Bluetooth is switched off.
→ To check whether the Bluetooth function was deactivated correctly, query the status by press
ing the
button (see Page 94).
8.6.2 Switching on Bluetooth
► With the Bluetooth function deactivated, press and hold the
a short vibration signal is emitted and the symbol in the button lights up blue .
→ Bluetooth is switched on.
→ To check whether the Bluetooth function was activated correctly, query the status by pressing
the
button (see Page 94).
8.7 Querying the status of the component
8.7.1 Query status through cockpit app
1) When the component is connected, tap the symbol in the main menu.
2) In the navigation menu, tap the entry "Status".
8.7.2 Status display in the cockpit app
Menu option
Steps per day: 25
Overall steps: 1745
Service
Batt.: 68
9 MyModes
In addition to the MyModes "Training mode" and "Freeze position", the O&P professional can
configure a MyMode "User defined" using the adjustment app. These MyModes can be selected
using the Cockpit app.
9.1 Switching MyModes with the cockpit app
Once a connection to an orthosis has been established, the Cockpit app can be used to switch
between the MyModes.
Information on switching
•
It is always possible to switch back to basic mode by turning the product off and back on (see
Page 85) and by connecting/disconnecting the battery charger.
•
Before the first step, always check whether the selected mode corresponds to the required
motion type.
86
Description
Daily step counter
Total step counter
Display of the next mainten
ance date
Current charge level of the
component in percent
button, the symbol must be lit up blue .
button on the control panel until a
button on the control panel until
Possible actions
Reset the counter by tapping
the "Reset" button.
For informational purposes
only
For informational purposes
only
For informational purposes
only