Directives And Manufacturer's Declaration; Electromagnetic Environment - Otto Bock 17KO1 Series Instructions For Use Manual

LED on LED on bat­
power tery charger
supply

15.3 Directives and manufacturer's declaration

15.3.1 Electromagnetic environment

This product is designed for operation in the following electromagnetic environments:
• Operation in a professional healthcare facility (e.g. hospital, etc.)
• Operation in areas of home healthcare (e.g. use at home, use outdoors)
The customer or user of the product must ensure that it is operated in such an environment.
Observe the safety notices in the section "Information on proximity to certain areas" (see
Page 64).
The following tables outline the test levels of the tests to be carried out. The higher value applies if
there is a difference between the operating environments listed in the tables below.
Table 1 – Electromagnetic emissions for all devices and systems
Directives and manufacturer's declaration – electromagnetic interference
The product 'C-Brace joint unit 17KO1=*' is designed for operation in an electromagnetic envir­
onment as specified below. The customer or user of the product 'C-Brace joint unit 17KO1=*'
must ensure that the device is operated in such an environment.
100
Error
No connection between battery
charger and power supply
Defective battery charger
Battery is fully charged (or con­
nection with product is interrup­
ted).
Resolution
Check whether the charging
cable plug is fully engaged on the
battery charger.
The battery charger and power
supply must be inspected by an
authorised Ottobock Service
Centre.
Take note of the confirmation sig­
nal for differentiation.
When the battery charger is con­
nected, a self-test is conducted
and confirmed by beeps/vibration
signals.
When these signals are emitted,
the battery is fully charged.
If no signals are emitted, the con­
nection to the product is interrup­
ted.
If the connection to the product is
interrupted, an authorised
Ottobock Service Centre must
inspect the product, battery char­
ger and power supply.