Control Elements For Cockpit App - Otto Bock Kenevo 3C60 Instructions For Use Manual

INFORMATION
After activating the "visibility" of the component (holding the component with the sole of the foot
facing up, or connecting and then disconnecting the battery charger), the component can be
recognised by another device (e.g. smartphone) within 2 minutes. If registration or establishing
the connection takes too long, the process of establishing a connection is cancelled. In this
case, hold the component with the sole of the foot facing up again, or connect and then discon­
nect the battery charger.

7.2 Control elements for cockpit app

1
Product
2
Bicycle ergometer
1. Basic Mode
5
6
100% 1. Basic Mode
1. Access the navigation menu (see page 68)
2. Product
The component name can only be changed with the adjust­
change
3
ment software.
3. If connections to more than one component have been
saved, you can switch between the saved components by
4
tapping the change option (see page 68).
4. If the "Intuitive bicycle ergometer function" function has
been enabled in the adjustment software and in the Cockpit
app, this function can be activated manually by tapping the
"Bicycle ergometer" MyMode and confirming with "OK".
7
See the section "Using a bicycle ergometer" (see page 77)
for further information.
8
5. Currently selected mode
6. Charge level of the component.
The current charge level is also displayed in %.
7. Display of and designation for the currently selected mode
(e.g. 1. Basic Mode)
8.
is attempting to re-establish the connection automatically.
No existing connection to the component.
Component battery fully charged
Component battery empty
Component battery charging
Connection to component has been established
Connection to component has been interrupted. The app
67