Cockpit App - Otto Bock 17KO1 Series Instructions For Use Manual

Control Battery charger
panel
The on time of the yellow
LED gets shorter as the
charge level increases. It
only flashes briefly at the
end of the charging pro­
cess.

7 Cockpit app

INFORMATION
The Cockpit app can be downloaded free of charge from the respective online store. For more
information, please visit the website: http://www.ottobock.com/cockpitapp. To download the
Cockpit app, the QR code on the supplied Bluetooth PIN card can be read with the mobile
device (requirement: QR code reader and camera).
INFORMATION
The language of the Cockpit app user interface can only be changed by the O&P professional
using the adjustment app.
INFORMATION
The serial number of the component to be connected has to be registered with Ottobock the
first time it is connected. If the registration is not accepted, use of the Cockpit app for this com­
ponent will be limited.
INFORMATION
Bluetooth on the component must be turned on in order to use the Cockpit app. Briefly press
the button on the control panel to check. In the
If the symbol in the button is not lit up, Bluetooth has to be switched by a long press of the
button.
The cockpit app enables switching from basic mode into the pre-configured
MyModes. In addition, information about the product (step counter, battery
charge level, etc.) can be called up.
The behaviour of the product can be changed to a certain extent on a day-to-
day basis using the app (e.g. while becoming accustomed to the product). At
the next appointment, the prosthetist can trace the changes using the adjust­
ment software.
Battery is being charged, battery charge level is less
than 34%
Battery is being charged, battery charge level is 34%
to 50%
Battery is being charged, battery charge level is 50%
to 67%
Battery is being charged, battery charge level is 67%
to 99%
Battery is fully charged
button, the symbol must be lit up blue .
73