Control Elements For Cockpit App; Cockpit App Navigation Menu; Managing Components - Otto Bock Genium Instructions For Use Manual

Cockpit app

8.3 Control elements for cockpit app

1
Product
2
1. Basic Mode 2. Golf
4
5
6
100%
1. Basic Mode

8.3.1 Cockpit app navigation menu

Product
MyModes
Functions
Settings
Status
General
Manage components
Imprint/Info

8.4 Managing components

Connections with up to four different components can be stored in the app. However, a component can only be
connected to one device at a time.
The following points need to be observed before establishing the connection:
• Bluetooth of the component must be switched on (see Page 88).
• Bluetooth of the device must be switched on.
• The device must not be in "flight mode" (offline mode), otherwise all wireless connections are turned off.
• The device must be connected to the internet.
80
1. Call up the navigation menu (see Page 80)
2. Product
The component name can only be changed with the adjustment soft­
change
ware.
3
3. If connections to more than one component have been saved, you can
switch between the saved components by tapping the entry change.
4. MyModes configured with the adjustment software.
Switching the mode by tapping the corresponding symbol and confirm­
ing by tapping "OK".
5. Currently selected mode
6. Charge level of the component.
Component battery fully charged
Component battery empty
7
Component battery is being charged
8
The current charge level is also displayed in %.
7. Display and name of the currently selected mode (e.g. 1. Basic Mode)
9
8. Mute mode is activated
9. Connection to component has been established
Connection to component has been interrupted. The app is attempt­
ing to re-establish the connection automatically.
Tap the
settings for the connected component can be configured in this menu.
Product
Name of the connected component
change
MyModes
Return to the main menu to switch MyModes
2. Golf
Functions
Call up additional functions of the component (e.g. turn off Bluetooth) (see
Page 88)
Settings
Change settings of the currently selected mode (see Page 85)
Status
Query status of the connected component (see Page 88)
Manage components
Add or delete components (see Page 80)
Imprint/Info
Display information/legal notices for the cockpit app
symbol in the menus to display the navigation menu. Additional
Genium 3B1-3/3B1-3=ST