Beep
Vibration
signal
signal
3x short
3x short
Battery charge level
During the charging process, the current battery charge level is indicated by the number of LEDs
lit on the side of the charger.
LEDs
0
Battery
0%-10%
charge level
16.3 Directives and manufacturer's declaration
16.3.1 Electromagnetic environment
This product is designed for operation in the following electromagnetic environments:
•
Operation in a professional healthcare facility (e.g. hospital, etc.)
•
Operation in areas of home healthcare (e.g. use at home, use outdoors)
Observe the safety notices in the section "Information on proximity to certain areas" (see
page 14).
50
Event
Maintenance note:
E.g.: Maintenance interval has been
exceeded, temporary disruption of a
sensor signal
1
2
10%-30%
30%-50%
Resolution
•
Use the Cockpit app to check
the next maintenance date for
the prosthesis (see page 34). If
the date is within the next
month, make a maintenance
appointment with the O&P pro
fessional. For this appointment,
the O&P professional has to be
provided with the battery char
ger and power supply in addi
tion to the prosthesis and tube
adapter.
•
Conduct the self-test again by
connecting/disconnecting
battery charger.
•
If the beep is emitted again and
the maintenance date has not
been reached or exceeded, you
should visit the O&P profes
sional soon. If necessary, the
O&P professional will forward
the prosthesis to an authorised
Ottobock Service Center.
•
The product can be used
without restrictions. However,
vibration signals may not be
generated.
3
4
50%-70%
70%-90%
the
5
>90%