Personality Data Setup; Repeater Channel Setup Menu - Futurecom Mobexcom P25 Installation & Programming Manual

Personality Data Setup

Repeater Channel Setup Menu

Field Name Options
/ Units
Ch # 1-192
Name Seven (7)
character
string
VR Type
BBR
Channel Mode
F. Duplex
Simplex
Half
Duplex
Fire Ground
Yes / No
Channel Type
Digital
Analog
Mixed
F.Analog
TPS
Rx Freq
[MHz]
Rx PL
[Hz] / DPL
Tx Freq
[MHz]
Tx PL
[Hz] / DPL
PL STE
[deg] /
DPL
VR Mode System
Local
User
Digital Vehicular Repeater Interfaced to XTL
April 2014
DVRS Installation & Programming Guide – PART II
Description
DVR Channel Number – referenced
in the Mobile Radio Channel Setup
when associating DVR channels to
Mobile Radio TGs.
DVR Channel name (alias)
displayed on the Control Head
when the DVR is enabled.
This field for information purposes
only.
Determines the DVR mode of
operation for the specific channel –
Full Duplex, Half Duplex or
Simplex.
Note that Half Duplex operation
refers to the audio processing
only. The DVR will still transmit
carrier locally while in Half
duplex mode unless the Primary /
Secondary feature is disabled.
Enables or Disables Fireground
Signalling Capabilities on the
selected DVR channel.
Defines the DVR Channel Type.
Digital mode can only be used
when the MSU operates on P25
Trunking or P25 Conventional
System.
Mixed Mode is selected when the
same DVR channel will be used by
Analog and P25 PSUs.
DVR Rx Frequency (Must match
the PSU Tx Frequency).
DVR Rx PL / DPL (Must match the
Analog PSU Tx PL/DPL).
DVR Tx Frequency (Must match the
PSU Rx Frequency).
DVR Tx PL / DPL (Must match the
Analog PSU Rx PL/DPL).
Analog PSU PL/DPL Squelch Tail
Elimination – must be programmed
to match the PSU.
Determines the Default DVR mode
when this DVR channel is selected.
TG Mode (Mobile Radio Channel
Setup) overwrites this setting.
If User is selected – the DVR mode
can be changed by the User from
the VRS button on the Control
Head.
TM
5000 (O3 or O5) or XTL
8M083X01 Rev. 16
6881013Y39
Notes
Read Only Field.
This field for information purposes
only.
If Full Duplex mode is selected, the
DVR can still be setup to operate
as Half Duplex if the MSU TG /
Channel currently selected on the
Control Head is programmed for
'Half Duplex' in the "Mobile Radio
Channel Setup" Screen.
Fireground (FG) signaling can be
enabled on analog or digital DVR
channels only.
The rules for switching between
the Digital and Analog Mode when
Mixed Mode is selected are
described in the Mixed Mode
Settings Paragraph.
Forced Analog Mode is described
in the Forced Analog Mode
section.
Applies to Analog, Mixed and F.
Analog Mode Only.
Applies to Analog, Mixed and F.
Analog Mode Only.
Applies to Analog, Mixed and F.
Analog Mode Only.
TM
2500 (M5)
Page 21 of 79