Futurecom Mobexcom P25 Installation & Programming Manual page 60

Field Name Options
/ Units
Steering Table screen
Steering in Yes
Emergency
No
Steering Revert
Yes
No
Digital Vehicular Repeater Interfaced to XTL
April 2014
DVRS Installation & Programming Guide – PART II
Description
Opens a steering Table that
enables the user to program up to
14 different mobile modes per DVR
channel and the corresponding Rx
PL/DPL codes that are used as
steering triggers. When the DVR
receives a LPSU transmission with
the programmed PL/DPL, it will
steer the MSU to the corresponding
MSU mode.
Default setting is 'No' (Disabled).
When steering in emergency is
Disabled, the DVR suspend
steering until the emergency is
cleared. The DVR disregards the
programmed RX PL/DPL and
repeats all traffic to the System.
If enabled (set to 'Yes') the VR
steering does not change when
emergency has been declared.
Enables ('Yes') or Disables ('No")
MSU revert to the originally
selected zone/channel after the
steering inbound call is complete
and the Steering Hang Timer
(System Setup 1) has expired.
TM
5000 (O3 or O5) or XTL
8M083X01 Rev. 16
6881013Y39
Notes
Applicable to Analog DVR Modes
only.
At present time, this feature is only
supported in System mode.
Applicable to Analog DVR Modes
only.
Applicable to Analog DVR Modes
only.
TM
2500 (M5)
Page 24 of 79