Writing To The Dvr (Downloading Data); Applying Dpd File ('Cloning'); Writing Selected Changes To The Dvr - Futurecom Mobexcom P25 Installation & Programming Manual

Writing to the DVR (Downloading Data)

Applying dpd File ('Cloning')

Select File  DPD Files (Templates)  Apply DPD to The Repeater.
Specify the desired .dpd file name and location when prompted.

Writing Selected Changes to the DVR

If any changes are made while reviewing the personality data of a DVR (On-Line), the
fields containing changes are shaded in green (if the changes are valid).
After making the necessary changes to all the settings on the various Tweaker screens,
the new personality can be saved to the DVR by executing any of the following:
F4
OR
Repeater  Save Changes to Repeater
OR
Repeater  EEPROM Maintenance (Ctrl+E)  Changes ->Repeater
OR
Click on the EEPROM Maintenance Icon  Changes -> Repeater
Reset the Repeater (after the changes are saved) in order to ensure the changes are in
effect. Resetting of the DVR can be done by executing any of the following methods:
Repeater  Reset Repeater
OR
F3
OR
EEPROM Maintenance  Reset Repeater
OR
Power OFF and ON the MSU
Digital Vehicular Repeater Interfaced to XTL
April 2014
DVRS Installation & Programming Guide – PART II
TM
5000 (O3 or O5) or XTL
8M083X01 Rev. 16
6881013Y39
TM
2500 (M5)
Page 9 of 79