Compliance With Rf Energy Exposure Safety Standards - Futurecom Mobexcom P25 Installation & Programming Manual

Compliance with RF Energy Exposure Safety
Standards
This radio equipment is intended for use in occupational / controlled conditions,
where users have full knowledge of their exposure and can exercise control over
their exposure to meet FCC limits. This radio device is NOT authorized for general
population, consumer or any other use.
To ensure compliance with Radio Frequency (RF) Energy Safety Standards:
Install only Futurecom / Motorola approved antennas and accessories.
Ensure the antenna installation is consistent with the DVR Antenna Installation
instructions described in this document as well as with the Mobile Radio Antenna
Installation Instructions provided in the Motorola Installation Manual.
Ensure the Product & RF Safety Booklets enclosed with the Mobile Radio and
the DVR are available to the end user upon completion of the installation.
April 2014
DVRS Installation & Programming Guide – PART I
ATTENTION!
8M083X01 Rev. 16
6881013Y39
Page 4 of 30