Configurable Relay Connection (Output 1 And Output 2) - ABB REACT 2 Series Product Manual

C
onfigurable Relay connection (OUTPUT 1 and OUTPUT 2)
41
least (supplementary insulation in relation to the DC input voltage)
activation. It can be connected with normally open contact (being
connected between the NO terminal and the common contact C) and
with normally closed contact (being connected between the NC terminal
and the common contact C).
Terminal Terminal
Description
name number
N.C. "Normally closed" terminal of multifunctional relay
OUTPUT 1 C "Common" terminal of multifunctional relay
N.O. "Normally open" terminal of multifunctional relay
N.C. "Normally closed" terminal of multifunctional relay
OUTPUT 2 C "Common" terminal of multifunctional relay
N.O. "Normally open" terminal of multifunctional relay
Different types of devices (light, sound, etc.) can be connected to the
relay, provided they comply with the following requirements:
Alternating current
Maximum Voltage: 240 V AC
Direct current
Maximum Voltage: 30 V DC
Cable requirements
Conductor cross-section: from 0.14 to 1.5 mm
paragraph on chapter 7).
- 99 -
5 - Installation
Maximum Current: 1 A
Maximum Current: 0.8 A
2