Independent Channel Configuration (Default Configuration); Configuration Of Parallel-Connected Channels - ABB REACT 2 Series Product Manual

I
ndependent channel configuration (default configuration)
This means that the jumper (supplied) between the positive poles of the
DC (IN1 and IN2) connectors
which must be selected during the guided setup for commissioning the
system is "INDEPENDENT".
32
C
onfiguration of parallel-connected channels
This means that the jumper (supplied) between the positive poles of the DC
(IN1 and IN2) connectors
must be selected during the guided setup for commissioning the system is
"PARALLEL".
32
input channels (MPPT) independently.
must not be installed and that the mode
32
IN1 IN1
input channels (MPPT) connected in parallel.
must be installed and that the mode which
32
IN1 IN1
- 87 -
5 - Installation
IN2 IN2
IN2 IN2