Connection For The Ac Output Connector To The Inverter - ABB REACT 2 Series Product Manual

C
onnection for the AC output connector to the inverter
procedure on it.
1
to the AC cable, do not leave excess cable windings hanging, etc).
In order to maintain the inverter's level of IP protection, the corresponding part must be installed
IP65
with the AC cable connected or the protective cover, on the AC output connector.
For all inverter models, connection to the electrical grid is carried out
using the AC output connector
1. Remove the pre-installed protective cover on the inverter by pressing
2. Insert the counterpart in the AC output (GRID) connector
careful to align the reference points (present on both connectors)
which prevent connection errors.
3. Push the counterpart until you hear "click"
2
- 77 -
17
.
3
5 - Installation
17
being
Click