Environmental Checks - ABB REACT 2 Series Product Manual

E
nvironmental checks
REACT2 system
20cm
10cm 10cm
20cm
REACT2-UNO
20cm
10cm 10cm
20cm
REACT2-BATT
20cm
10cm 10cm
20cm
environmental conditions (protection rating, temperature, humidity,
altitude, etc.).
warranty void as it may cause:
- power limitation phenomena in the inverter and in the battery unit.
- premature wear of the electrical/electromechanical components.
- premature wear of the mechanical components (gaskets) and of the
user interface (synoptic).
- reduction in performance, lifetime and possible damage of the battery unit.
as to prevent overheating.
be present.
humidity level.
UNO and REACT2-BATT that could prevent the inverter installation and
switches, etc.) which must be at least 20cm from the equipment. These
distances must be maintained also to facilitate the circulation of the air
needed to cool the unit and to facilitate the operations to install/maintain
hardware and software which is done by dismantling the covers placed
on the front.
presence of people or animals is expected, because of the noise that
the system produces during operation The level of the sound emission
the type of surface around the inverter, the general properties of the
room, etc.) and the quality of the electricity supply.
- 58 -
5 - Installation