ABB REACT 2 Series Product Manual page 91

5 - Installation
Installation of Multicontact MC4 connectors requires crimping to be carri-
ed out with suitable equipment.
- Strip the cable to which you want to apply the connector (after verifying
that it complies with the connector limits).
2
4...6mm
- Apply the terminal to the conductor using the designated pliers.
5.5...9mm
32.6020-19100
Multi-Contact
- Insert the cable with the terminal into the interior of the connector, until
you hear the click indicating that the terminal is locked inside the con-
nector.
Click
-
ration.
Multi-Contact
32.6024
2.5 Nm
- 89 -