Red Gfi Led - ABB REACT 2 Series Product Manual

Icons status Operating state
Blackstart operating mode
Indicates an anomaly in the operation of the internal ventilation system that could limit output
power at high ambient temperatures.
The inverter is performing an Autotest
Indicates that a leakage to ground from the PV generator has been detected, causing the
inverter to disconnect from the grid.
Icon status Operating state
Scanning for available wireless networks.
Wireless or Ethernet network is connected to the network
Icon status Operating state
Meter is communicating
Icon status Operating state
No battery has been commissioned
Charging
Discharging
Idle - sleep
Fault
End of battery life reached
R
ed GFI LED
You are advised to have the plant inspected by the installer or a specialist should this malfunction
occur repeatedly.
When the icon
server user interface. Should the inverter reconnect normally to the grid,
the fault was due to temporary phenomena.
Should the inverter not reconnect to the grid it is necessary to isolate
it (DC side, AC side, and any batteries), then contact the installer or
authorised centre to repair the fault to the photovoltaic generator.
- 113 -
7 - Operation
The inverter is in night