ABB REACT 2 Series Product Manual page 65

connectors:
- To remove the battery signal
08
connectors simply pull it.
- To remove the battery power
09 press the latch
connectors
( in red) and pull it off.
highlighted
Click
from the connector of the Wi-
Fi antenna located on the
22
lower part of the REACT2-UNO
and install the Wi-Fi antenna
02
(supplied inside the REACT2-
UNO box) by screwing it into the
using personal protective
clothing and/or equipment, such
as insulating gloves.
ABB energy meter.
08
09
Click
Click
Click
- 65 -
between inverter and battery unit
(supplied inside the REACT2-BATT
box).
Give each cable a pull test to
22
5 - Installation
08
09
22