ABB REACT 2 Series Product Manual page 90

2
4...6mm
6...7mm
Installation of Weidmüller WM4 connectors requires crimping to be carri-
ed out with suitable equipment.
- Strip the cable to which you want to apply the connector (after verifying
that it complies with the connector limits).
- Apply the terminal to the conductor using the designated pliers.
Weidmüller
CTF PV WM4
(1222870000)
- Insert the cable with the terminal into the interior of the connector, until
you hear the click indicating that the terminal is locked inside the con-
nector.
ration.
2.0÷2.5 Nm
- 90 -
5 - Installation
Click
WEIDMÜLLER
SET MULTI-TOOL PV
(1217280000)
-