Storage Of Equipment; Special Rules For Storage Of React2-Batt - ABB REACT 2 Series Product Manual

S
torage of equipment
S
pecial rules for storage of REACT2-BATT
The storage period of the REACT2-BATT begins from the date, on which
the product is produced by ABB (the production date is indicated on the
product label placed on the lateral surface of the chassis and expressed
as week of production - Year of production). In order to guarantee the full
operation of the system, REACT2-BATT shall be put into service within 6
months at most of the date of delivery by ABB to the recipient of the goods.
In order to reduce risks during storage of the REACT2-BATT it must be
considered that:
Do not stack more than 4 REACT2-BATT boxes.
Keep the boxes upright. Do not store upside down or on the sides.
Storage temperature shall be in the range of -20 to +25°C (6 month
storage time) or -20 to +45°C (3 month storage time).
Storage humidity shall be less than 80% RH non-condensing.
Capacity degradation will occur depending on storage time, temperature,
and humidity.
To minimize capacity degradation, storing in a dry place with temperature
less than 25°C.
For the rules on storing the battery, refer to the regulations in force in the
country concerned. In addition to the regulations in force in the Country of
interest, the following recommendations should be followed:
Store the Battery Unit in its original packing (including the pallet), in a dry,
cool, well-ventilated environment and away from water.
Do not open/tamper with the original packing.
Do not crush/deform the packing.
Equip the storage environment with appropriate PPE.
Never leave the REACT2-BATT in places where these may be accidentally
hit and damaged.
temperature areas.
In the static position, the strapped batteries can be stacked up to a
maximum of 4 units.
Handling and loading onto means of transport is only allowed with a stack
of maximum 2 units.
- 52 -
4 - Lifting and transport