Communication Identification Label - ABB REACT 2 Series Product Manual

MODEL NAME
P/N:PPPPPPPPPPP
WO:XXXXXXX
SO:SXXXXXXXX Q1
SN:YYWWSSSSSS WK:WWYY
POWER-ONE ITALY S.p.A
Via S.Giorgio 642, Terranuova Bracciolini (AR), 52028, Italia
characterisation of the inverter by ABB.
they must be regularly cleaned and always kept in sight.
C
ommunication identification label
SN WLAN: SSSSSSSSSS
PN WLAN: PPP.PPPPP.PP
MAC: XX:XX:XX:XX:XX:XX
Remove and apply
on the Quick
e
SN Inverter: SSSSSSSSSS
MAC: XX:XX:XX:XX:XX:XX
PK: KKKK-KKKK-KKKK-KKKK
bottom part and apply it on the plant documentation. (it's recommend to create a plant map and
In addition to the label showing the inverter data, on the right side of
The label displays the following information:
- YY = Year of manufacture
- WW = Week of manufacture
- SSSSSS = sequential number
REACT2-UNO. The label displays the following information:
- To be used to obtain the SSID of the wireless access point
created by the inverter: ABB-XX-XX-XX-XX-XX-XX
(where "X" is a hex digit of the MAC address).
- To be used to obtain the "Host Name":
http://ABB-XX-XX-XX-XX-XX-XX.local
(where "X" is a hex digit of the MAC address).
- MAC address it's the only required information to register the
inverter with Aurora Vision.
To be used as wireless access point password, or to be used to
access to the Web UI as username and password in case of lost
credentials, and to commission inverter using ABB Installer for
Solar Inverters.
- 21 -
2 - Characteristics
consisting of: