ABB REACT 2 Series Product Manual page 106

STEP 2 (Optional) - Residential wireless network connection.
The parameters relating to the home wireless network (set
on the router) that must be known and set during this step
are:
IP Settings: DHCP or Static.
If you select the DHCP function (default setup) the rou-
ter will automatically assign a dynamic IP address to the
inverter whenever it tries to connect to the user network.
stem. The data which has to be entered in order for IP static
address assigning to take place will appear. Complete the
mandatory with the exception of the secondary DNS server).
Available
Identify and select your own (home) wireless network from all
of the networks that can be detected with the Update button ).
Password: Wireless network password.
Enter the password for the destination network (if necessary)
and start the connection attempt (it will take a few seconds).
Click on "Connect" button to connect the inverter to the home
wireless network.
to the home wireless network.
Once the inverter
The message provides the IP Address assigned by the home wireless
network router to the inverter that can be used each time you want to
access the internal webserver, with the inverter connected to the home
wireless network. Take note of it.
wizard.
- 106 -
networks
is connected to
7 - Operation
-
(SSID):
the dome-