ABB REACT 2 Series Product Manual page 115

Connection to the inverter in "AP Mode"
the board setup (tablet, smartphone or PC) and connect it to the Access
Point created by the inverter system: the name of the wireless network
created by the system that the connection should be established with,
will be:
ABB-XX-XX-XX-XX-XX-XX
where "X" is a hex digit of the MAC address (MAC address can be found
verter or applied during the commissioning phase to the plant documen-
tation).
the plant documentation) as access point password.
Note that it's required to digit also the dash "-" characters of the
In case of need, product key can be recovered by Aurora Vision Cloud of by calling ABB tech-
nical support.
from v.55, Firefox versions from v.50) and enter the pre-set IP address
192.168.117.1 to access the login page.
PRODUCT KEY (printed on the "Communica-
- 115 -
7 - Operation
-