Segger J-Link User Manual page 75

Syntax
exec <Command>
Parameter
Command
Example
exec SupplyPower = 1
3.2.1.6 exit (qc, q)
This command closes the target connection, the connection to the J-Link and exits J-
Link Commander.
Syntax
q
3.2.1.7 exitonerror (eoe)
This command toggles whether J-Link Commander exits on error or not.
Syntax
ExitOnError <1|0>\
Parameter
<1|0>
Example
eoe 1
3.2.1.8 f
Prints firmware and hardware version info. Please notice that minor hardware revi-
sions may not be displayed, as they do not have any effect on the feature set.
Syntax
f
3.2.1.9 fdelete (fdel)
On emulators which support file I/O this command deletes a specific file.
Syntax
fdelete <FileName>]
Parameter
FileName
Example
fdelete Flasher.dat
J-Link / J-Trace (UM08001)
Command string to be executed.
1: J-Link Commander will now exit on Error.
0: J-Link Commander will no longer exit on Error.
File to delete from the Flasher.
Meaning
Meaning
Meaning
© 2004-2017 SEGGER Microcontroller GmbH & Co. KG
75