Segger J-Link User Manual page 116

116
Following additional command line options are available. These options are tempo-
rary for each start of GDB Server.
Command line option
-excdbg
-jtagconf
-log
-rtos
-singlerun
-scriptfile
-select
-settingsfile
-strict
-x
-xc
-cpu
Table 3.9: General command line options
J-Link / J-Trace (UM08001)
CHAPTER 3
Enable exception debugging.
Configures a JTAG scan chain with multiple devices on it.
Logs the GDB Server communication to a specific file.
Selects a RTOS plugin (DLL file)
Starts GDB Server in single run mode.
Uses a J-Link scriptfile.
Selects the interface to connect to J-Link (USB/IP).
Selects the J-Link Settings File.
Starts GDB Server in strict mode.
Executes a gdb file on first connection.
Executes a gdb file on every connection.
Selects the CPU core. Deprecated, use
© 2004-2017 SEGGER Microcontroller GmbH & Co. KG
J-Link software and documentation package
Explanation
-device
instead.