Segger J-Link User Manual page 222

222
J-Link settings file, please refer to The J-Link settings file on page 205.
5.11.7.4 In other debugger IDE environments
To execute a J-Link script file out of your debugger IDE, simply select the script file
to execute in the Settings tab of the J-Link control panel and click the save button
(after the debug session has been started). Usually a project file for J-Link is set by
the debugger, which allows the J-Link DLL to save the settings of the control panel in
this project file. After selecting the script file restart your debug session. From now
on, the script file will be executed when starting the debug session.
5.11.7.5 In GDB Server
In order to execute a script file when using J-Link GDB Server, simply start the GDB
Server, using the following command line paramter:
-scriptfile <file>
For more information about the -scriptfile command line parameter, please refer
to J-Link GDB Server on page 92.
J-Link / J-Trace (UM08001)
CHAPTER 5
© 2004-2017 SEGGER Microcontroller GmbH & Co. KG
Working with J-Link and J-Trace