Menus And Shortcuts - Segger J-Link User Manual

Example
JLinkRTTViewer.exe -rttaddr 0x20000000
3.7.7.8 --rttrange
Sets one or more memory ranges, where the J-Link DLL shall search for the RTT con-
trol block.
Syntax
--rttrange <RangeStart[Hex]> <RangeSize >[, <Range1Start [Hex]> <Range1Size>]>
Example
JLinkRTTViewer.exe -rttrange "20000000 400"
3.7.7.9 --autoconnect
Let J-Link RTT Viewer connect automatically to the target without showing the Con-
nection Settings (see Connection Settings on page 135).
Syntax
--autoconnect
Example
JLinkRTTViewer.exe --autoconnect
3.7.8

Menus and Shortcuts

Menu entry
File
-> Connect...
-> Disconnect
-> Exit
Terminals
-> Add next terminal
-> Clear active terminal
-> Close active terminal
-> Open Terminal on output
Table 3.15: RTT Viewer Menus and Shortcuts
J-Link / J-Trace (UM08001)
Contents
Opens the connect dialog and con-
nects to the targets
Disconnects from the target
Closes connection and exit RTT
Viewer.
Opens the next available Terminal
Tab.
Clears the currently selected ter-
minal tab.
Closes the active Terminal Tab.
If selected, a terminal is automati-
cally created, if data for this termi-
nal is received.
© 2004-2017 SEGGER Microcontroller GmbH & Co. KG
139
Shortcut
F2
F3
Alt-F4
Alt-A
Alt-R
Alt-W