Segger J-Link User Manual page 36

36
Data output rise time (T
Data output fall time (T
Clock rise time (T
Clock fall time (T
Table 1.2: J-Link specifications
1.3.3.3 Hardware versions
Version 9.1
• Initial design based on STM32F205.
Version 9.2
Identical to version 9.1 with the following exception:
• Pin 1 (VTref) is used for measuring target reference voltage only. Buffers on J-
Link side are no longer powered through this pin but via the J-Link internal volt-
age supplied via USB.
1.3.3.4 Software and Hardware Features Overview
For detailed information about hardware and software features of your J-Link/J-Trace
model and version see:
• https://wiki.segger.com/Software_and_Hardware_Features_Overview
J-Link / J-Trace (UM08001)
CHAPTER 1
)
rdo
)
fdo
)
rc
)
fc
T <= 10ns
rdo
T <= 10ns
fdo
T <= 3ns
rc
T <= 3ns
fc
© 2004-2017 SEGGER Microcontroller GmbH & Co. KG
Introduction