J-Link Ultra - Segger J-Link User Manual

60
2.4.3

J-link ULTRA+

J-link ULTRA+ is a JTAG/SWD emulator designed for ARM/Cor-
tex and other supported CPUs. It is fully compatible to the stan-
dard J-Link and works with the same PC software. Based on the
highly optimized and proven J-Link, it offers even higher speed
as well as target power measurement capabilities due to the
faster CPU, built-in FPGA and High speed USB interface.
J-link ULTRA has a built-in 20-pin JTAG/SWD connector.
Included Licenses
J-Link Flashloaders
J-Link GDB Server
J-Link Debugger
J-Flash
Unlimited Flash Breakpoints
RDI / RDDI
2.4.4 J-Link PRO
J-Link / J-Trace (UM08001)
CHAPTER 2
J-Link PRO is a JTAG emulator designed
for ARM cores. It connects via USB or Ethernet to a PC running
Microsoft Windows, Apple OSX or Linux. J-Link has a built-in
20-pin JTAG connector, which is compatible with the standard
20-pin connector defined by ARM.
Included Licenses
J-Link Flashloaders
J-Link GDB Server
J-Link Debugger
J-Flash
Unlimited Flash Breakpoints
RDI / RDDI
© 2004-2017 SEGGER Microcontroller GmbH & Co. KG
Licensing