Installing The Solenoid Valve Set - Mitsubishi Electric RV-4FM-SE Series Instruction Manual

3.2 Installing the solenoid valve set

As shown in Fig. 3-3, install the solenoid valve set on the forearm.
The installation procedure of solenoid valve set depends on robot series and specifications. Refer to below and
install the solenoid valve set properly.
Installation method differ depending on a robot's type. Please refer to the explanation section corresponding to
the robot which uses.
<Explanation section for each type of robot >
・ RV-4F/7F series and RV-7FLL robots: Refer to
・ RV-13F/13FL and RV-20F robots: Refer to
Solenoid valve set
Fig.3-3 ： The installation image of the optional solenoid valve set (RV-4F series)
Forearm
* The figure is an example installed
1F-VD02-02.
Page 58, "(1) RV-4F/7F series,
Page 64, "(2) RV-13F/13FL series,
3Installing the option devices
RV-7FLL".
RV-20F".
Installing the solenoid valve set 3-57