Start Collecting Logs; Stop Collecting Logs; Change The Log File Settings - Novatel SMART7 Installation And Operation Manual

SMART7 Operation
If a communication port is selected, ensure that a device to receive the log is connected to
that port.
The filename and directory used when collecting to a file is configured in the Settings dialog
box. Refer to Change the Log File Settings below.

3.10.3 Start Collecting Logs

To start collecting logs:
1. Ensure that the logs you want to collect are shown on the Logging Control Window.
2. Click the Start Recording button.
The button changes to Stop Recording.
If logs are being collected in a file on the computer, the file name used and a running total of
the file size appears.

3.10.4 Stop Collecting Logs

To stop collecting logs:
1. Click the Stop Recording button.

3.10.5 Change the Log File Settings

When logging to a file on the NovAtel Connect computer, the file used is determined by the log
file settings. To change the log file settings:
1. Click the
The Settings dialog box appears.
SMART7 Installation and Operation User Manual 0C
button in the Logging Control Window.
48