Examining The Aux1 Status Word; Table 19: Resolving An Error In The Aux1 Status Word - Novatel SMART7 Installation And Operation Manual

Chapter 8 Troubleshooting
Bit Set
None. This bit indicates if clock steering has been manually disabled. Refer also to the
21
FRESET command in the
None. This bit only indicates if the clock model is valid. Refer also to the FRESET
22
command in the
None. This bit indicates if the phase-lock-loop is locked when using an external oscillator.
23 Refer also to the FRESET command in the
Manual.
Check the CPU idle time. Check for unnecessary logging. Check for simultaneous use of
24
functionality.
None. These bits identify the receiver family. For OEM7 receivers, bit 25 is set to 1 and
25-26
bit 26 is set to zero.
Interference Toolkit HDR mode status. When this bit is set to 1, Interference Toolkit HDR
27
mode is enabled.
Digital filter status. When this bit is set to 1, an Interference Toolkit digital filter is
28
enabled.
None. This bit indicates if any bits in the auxiliary 3 status word are set. The auxiliary 3
word provides status information and does not contain any new information on problems.
29
Refer also to the FRESET command in the
Manual.
None. This bit indicates if any bits in the auxiliary 2 status word are set. The auxiliary 2
word provides status information and does not contain any new information on problems.
30
Refer also to the FRESET command in the
Manual.
None. This bit indicates if any bits in the auxiliary 1 status word are set. The auxiliary 1
word provides status information and does not contain any new information on problems.
31
Refer also to the FRESET command in the
Manual.

8.2 Examining the AUX1 Status Word

Table 19: Resolving an Error in the AUX1 Status Word below provides actions to take when your
receiver has an error flag in the AUX1 status word.

Table 19: Resolving an Error in the AUX1 Status Word

Bit Set
0-2 Jammer detected
3 None. This bit indicates that Position Averaging is ON
4-6 Jammer detected
SMART7 Installation and Operation User Manual 0C
Action to Resolve
Agriculture Commands and Logs Reference
Agriculture Commands and Logs Reference
Action to Resolve
Manual.
Agriculture Commands and Logs Reference
Agriculture Commands and Logs Reference
Agriculture Commands and Logs Reference
Agriculture Commands and Logs Reference
Manual.
110