APPENDIX A SMART7 Technical Specifications
A.7 SMART7 Mounting Plate Specifications
The optional SMART7 mounting plate is NovAtel part number 1020089. The optimal screw pen-
etration into the SMART7 mounting holes is 6 mm (±1 mm) deep. When selecting screws for
mounting the SMART7, ensure the screw penetration does not exceed this specification. Using
excessively long screws can damage the SMART7 enclosure.
Figure 41: SMART7 Mounting Plate Dimensions (Optional)
Refer to Mounting and Orienting the SMART7 on page 22 for installation details.
SMART7 Installation and Operation User Manual 0C
138