APPENDIX A SMART7 Technical Specifications
Strobes
Input/Output
Emulated
Output
Radar (ER)
PPS
Output
SMART7 Installation and Operation User Manual 0C
Table 26: SMART7 Strobes Description
0VDC to VBATT+ (also refer to SMART7 Interface Cable (Optional
Accessory) on the next page)
3.3V CMOS
A time synchronization output. This is a pulse where the leading
edge is synchronized to receiver calculated GNSS Time. The
polarity, period and pulse width can be configured using the
PPSCONTROL command
Comment
135