Function Chart - ABB i-bus KNX Product Manual

®
ABB i-bus KNX
Planning and Application
4.2

Function chart

The function chart indicates the sequence, in which the functions of the DGN/S are processed. If several
communication objects in the function block point to the same function, they have equal priority and are
processed in the sequence in which they are received.
Only one additiolnal function is possible per output:
deactivate = 0
activate
Additional function
*) reaction to dimming,
brightness and
scene commands can
be parameterized
130 2CDC 507 114 D0201 | DGN/S 1.16.1
Switch (group)
Dim (group)
Brightness value (group)
Recall/save 1 bit /
8 bit scenes
Activate staircase
lighting mode
= 1
None /DGN/S Staircase lighting
Dimming threshold (minimum, maximum dimming value)
Group
Switch
Dim
Set Brightness
Scenes
Activate
sequence mode
Sequence
Evaluation KNX bus voltage failure / recovery
Curve correction
Burn-in function evaluation
If burn-in function active,
all brightness values are not equal
to 0 % (OFF) are lit at 100 %
Control value
lighting group
Output
Switch Switch (output)
Dim Dim (output)
Set Brightness Brightness value (output)
Activate
slave mode
Brightness value of slave
Slave
Communication objects
Status
Brightness value