ABB i-bus KNX Product Manual page 71

®
ABB i-bus KNX
Commissioning
Brightness value of lighting group
after slave emergency
Options:
This parameter defines the brightness of the lighting group after the slave emergency lighting state has
ceased. The slave emergency lighting operation is ended when a telegram with the value 0 is received via
the communication object Slave emergency active/status or internally if the slave emergency requirement
is not longer fulfilled. The internally slave emergency requirement has a higher priority as the a telegram
with value 0..
Important
The settings relate to the (Slave) emergency lighting operation that is triggered via the communication
object Output Slave emergency active/status triggered.
The communication object should be enabled in the
0% (OFF), 1 % (3)...100 % (255)
Parameter window Central, page 32.
DGN/S 1.16.1 | 2CDC 507 114 D0201 69