ABB i-bus KNX Product Manual page 15

®
ABB i-bus KNX
Device Technology
Temperature range
Environmental conditions
Design
Installation
Mounting position
Weight
Housing, colour
Approvals
CE mark
1)
The length relates to the common DALI control cable. The maximum values are rounded off and relate to the resistance values. EMC influences
are not considered. For this reason, the values should be considered as absolute maximum values.
2)
Both "normal" lamps as well as battery operated emergency lighting can be connected in a mixed configuration to the DGN/S 1.16.1. However, the
maximum number of DALI devices may not exceed 64.
Device type Application program
DGN/S 1.16.1 Switch Dim Emergency 1f
DALI/...*
* ... = current version number of the application program. Please observe the software information on our homepage for this purpose.
Note
The DGN/S is compliant to the SELV characteristics to IEC 60 364-4-41 (VDE 0100-410).
DALI does not need to feature SELV properties, and it is possible to route the DALI control lines to-
gether with the mains voltage on a multi-core cable.
Note
The ETS and the current version of the device application program are required for programming.
The current version of the application program is available for download on the internet at
www.abb.com/knx. After import in the ETS, it is available in the ETS under ABB//Lighting/ DALI/ Switch
Dim Emergency 1f DALI.
The device does not support the closing function of a KNX device in the ETS. If you inhibit access to all
devices of the project with a BCU code, it has no effect on this device. Reading out data and program-
ming is still possible.
operation
storage
transport
humidity
modular installation device (MDRC)
dimensions
mounting width
mounting depth
on 35 mm mounting rail
as required
0.16 kg
plastic housing, grey
KNX to EN 50 090-1, -2
in accordance with the EMC guideline and low
voltage guideline
Maximum number of
communication objects
246
-5 °C...+45 °C
-25 °C...+55 °C
-25 °C...+70 °C
maximum 93 %, moisture condensation should
be excluded
modular installation device, ProM
90 x 72 x 64.5 mm (H x W x D)
4 modules at 18 mm
68 mm
to EN 60 715
certification
Maximum number of Maximum number of
group addresses associations
254 255
DGN/S 1.16.1 | 2CDC 507 114 D0201 13